Roland GO:LIVECAST Live Streaming Audio and Video Studio for Smartphones and Tablets - Manual (Page 40)

to
beginning
Using as a Satellite Camera
By using the satellite camera function, the image from the camera
of another smartphone can be shown in the GO:LIVECAST app. You
can alternately switch between the images from the two cameras, or
show the video from both in a split screen, and live-broadcast that
video.
NOTE
5 The GO:LIVECAST app must be installed both on the main smartphone (the
one that’s connected to the GO:LIVECAST unit) and on the satellite smart-
phone.
5 Both the main and the satellite smartphone must be connected to the same
Wi-Fi.
MEMO
5 When using this outdoors, you can use your smartphone’s Personal Hot Spot
function to connect the main and satellite phones so that the satellite camera
can be used even when there’s no Wi-Fi router (iOS only).
Operation on the main smartphone.
Operation on the satellite smartphone.
1.
Connect the main smartphone to the GO:LIVECAST, and
start the GO:LIVECAST app.
2.
Tap [Satellite Camera].
40