Samsung WM55B Flip Pro 55" 4K Interactive Touchscreen LED Display User Manual
Page 70
70
Anynet+ issues
Anynet+ does not work.
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI cable connections.
Check whether
Anynet+ (HDMI-CEC)
is set to
On
in
Menu
→
SETTINGS
→
External Device Manager
.
Check whether the remote control is Anynet+ compatible.
Anynet+ doesn’t work in certain situations. (initial setup)
If you have removed and then reconnected the HDMI cable, please make sure to search
devices again or turn your product off and on again.
Check if the Anynet+ function of the Anynet device turns on.
I want to start Anynet+.
Check if the Anynet+ device is properly connected to the product and check if
Anynet+
(HDMI-CEC)
is set to
On
in
Menu
→
SETTINGS
→
External Device Manager
.
I want to exit Anynet+.
Press the
SOURCE
button on the product remote control and select a non-Anynet+ device.
The message “
Disconnecting Anynet+ device...
”
appears on the screen.
You cannot use the remote control when you are configuring Anynet+ or switching to a view
mode.
Use the remote control after the product has completed Anynet+ configuration or has
finished switching to Anynet+.
The Anynet+ device does not play.
You cannot use the play function when initial setup is in progress.