How to set up using the wps button – Samsung WM55B Flip Pro 55" 4K Interactive Touchscreen LED Display User Manual
Page 24
24
1
Right click the
Network
icon on the bottom right of the screen.
2
In the pop-up menu that appears, click
Status
.
3
On the dialog that appears, click the
Support
tab.
4
On the
Support
tab, click the
Details
button. The Network connection values are
displayed.
How to set up manually
1
Set
Network Type
to
Wireless
from the
Open Network Settings
page.
2
The product searches for available wireless networks. When done, it displays a list of the
available networks.
3
In the list of networks, select a network.
"
If the desired wireless router does not appear, select
Refresh
to search again.
"
If the router cannot be found after retrying, select
Add Network
.
4
If you selected a password-protected network, enter the password, and tap
Go
.
"
You may skip this step if you selected an open network.
5
The network connection screen appears, and the verification process starts.
6
Select
Cancel
while network connections are being attempted. This will stop the
connection.
7
Select
IP Settings
on network connection screen. The
IP Settings
screen appears.
8
Select the field at the top and then set
IP setting
to
Enter manually
.
"
Changing
IP setting
to
Enter manually
automatically changes
DNS setting
to
Enter
manually
.
9
Enter the
IP Address
,
Subnet mask
,
Gateway
, and
DNS Server
values manually.
10
When done, select
OK
at the bottom of the page. The network test screen appears, and
the verification process starts.
11
When the connection has been verified, the
OK
button appears on the bottom of the
screen.
12
Tap
OK
to complete the setting.
How to set up using the WPS button
If your router has a WPS button, follow these steps.
1
Set
Network Type
to
Wireless
from the
Open Network Settings
page.
2
Select
Use WPS
.
3
Press the WPS or PBC button on your wireless router within the next two minutes. Your
product automatically acquires all the network setting values it needs and connects to
your network.
4
The network connection screen appears, and network setup is done.