MIDEA MES30S4AST - Manual (Page 44)

PREPARING
FOR
FIRST
USE
COOKTOP
OPERATION
OVEN
OPERATION
CONTROL SETTINGS
TROUBLESHOOTING
CLEANING
AND
MAINTENANCE
44
soapy water and a non-abrasive sponge. Glass cleaner can be used on door
glass to remove streaks. Stainless steel cleaner can be used on the exposed
metal to remove streaks.
Door can be removed for easier cleaning, servicing, or installation:
1. Open door fully.
2. On each door hinge, flip up the lock mechanism so that it engages with th
oven face when the door is rotated towards being closed.
3. Once both lock mechanisms are engaged, continue to rotate door until
~2-3 inches from being fully closed.
4. Grasp door firmly from the sides and lift door up and out from oven face
Do not lift door by door handle to reduce risk of broken door glass.
Clean door as frequently as desired to remove dust, splatter, and fingerprints.
Wipe door surfaces with a lightly damp soft cloth using mild soap and water.
Burned-on residue on interior door glass can be cleaned with glass cleaning
compound and/or razor scraper - see "Glass Cooktop" section above for
instructions. Enameled portions of the door interior can be cleaned using
WARNING
To maintain proper door seal during baking operations and self clean, do
not rub or clean the door gasket. It has a very low resistance to abrasion.
FIRE HAZARD
If door is removed, confirm that door operates correctly and seals
properly when reinstalled. If door gasket does not seal completely,
heat escaping from around doors could ignite cabinetry.
If the gasket becomes worn, frayed, or damaged in any way, contact a
qualified service provider for repair
NOTICE
TO PRESERVE APPEARANCE
To prevent streaking of internal door glass, do not allow excess water or
spray cleaner to enter any holes or slots in the door.
Do not use scouring pads, abrasive cleaners, strong liquid chemicals, steel
wool, or oven cleaners, as these may damage the door finish
Door:
SAFETY
INSTRUCTIONS