FujiFilm GFX 50S - Manual (Page 44)

26
2
F
irst St
eps
Attaching a Lens
The camera can be used with lenses for the FUJIFILM
G-mount.
Remove the body cap from the camera
and the rear cap from the lens. Place
the lens on mount, keeping the marks
on the lens and camera aligned, and
then rotate the lens until it clicks into
place.
O
Be careful not to touch the camera’s internal parts. Do not press the
lens release button while attaching the lens and be sure the latch has
securely clicked into place.
Removing Lenses
To remove the lens, turn the camera off , then
press the lens release button and rotate the
lens as shown.
O
To prevent dust accumulating on the lens
or inside the camera, replace the lens caps
and camera body cap when the lens is not
attached.
Lenses and Other Optional Accessories
The camera can be used with lenses and accessories for the FUJIFILM
G-mount.
O
Before attaching or removing (exchanging) lenses, attach the lens
caps and check that the lenses are free of dust and other foreign mat-
ter. Do not change lenses in direct sunlight or under another bright
light source, as light focused into the interior of the camera could
cause it to malfunction.