FujiFilm GFX 50S - Manual (Page 216)

198
P
eripherals and Optional A
c
c
essories
10
Flash Settings
To adjust settings for a fl ash unit mounted on the hot shoe or
connected via the sync terminal:
1 Connect the unit to the camera.
2 In shooting mode, select FLASH
FUNCTION SETTING in the
F (FLASH
SETTING) menu tab. The options
available vary with the fl ash unit.
EXIT
CH SETTING
MASTER SETTING
LED LIGHT SETTING
TTL-LOCK MODE
RED EYE REMOVAL
FLASH SETTING
FLASH FUNCTION SETTING
Menu Menu Description Description
P P
SYNC
TERMINAL
Displayed when no compatible fl ash unit is connected or
if a unit is connected via the sync terminal or uses only
the X-contact on the hot shoe.
199
SHOE MOUNT
FLASH
Displayed when an optional fl ash unit is mounted on the
hot shoe and turned on.
200
MASTER
(OPTICAL)
Displayed if an optional fl ash unit functioning as a master
fl ash for FUJIFILM optical wireless remote fl ash control is
connected and turned on.
203
N
SYNC TERMINAL will be also displayed if an incompatible fl ash
unit or no fl ash unit is connected.
3 Highlight items using the selector
and rotate the rear command dial to
change the highlighted setting. MODE
SHOE MOUNT FLASH
ADJUST END
4 Press DISP/BACK to put the changes into eff ect.