FujiFilm GFX 50S - Manual (Page 249)

231
T
echnical Not
es
12
Cleaning the Image Sensor
Dust that can not be removed using D USER SETTING >
SENSOR CLEANING can be removed manually as de-
scribed below.
O
Note that there will be a charge to repair or replace the image sensor
if it is damaged during cleaning.
1 Use a blower (not a brush) to remove
dust from the sensor.
O
Do not use a brush or blower brush.
Failure to observe this precaution
could damage the sensor.
2 Check whether the dust has been successfully removed. Re-
peat Steps 1 and 2 as necessary.
3 Replace the body cap or lens.