Canon EOS 80D User Manual
Page 475
475
3
Menu Settings
5
: Set-up 3 (Yellow)
Page
Video system
NTSC / PAL
Feature guide
Enable / Disable
Touch control
Standard / Sensitive / Disable
Battery information
Power / Remaining capacity / Shutter count /
Recharge performance / Battery registration /
Serial number / Battery history
Sensor cleaning
Auto cleaningf: Enable / Disable
Clean nowf
Clean manually
z
button display
options
Displays camera settings / Electronic level /
Displays shooting functions
z
button LV display
options
Live View info switch setting: 1 / 2 / 3 / 4
Histogram display: Brightness / RGB /
Display size
Reset
When using a wireless function or GPS device, be sure to check the
countries and areas of use, and observe the laws and regulations of the
country or region.
Note that when connecting GPS Receiver GP-E2 (sold separately) with a
cable, preparations as below are necessary.
- Update the GP-E2’s firmware to Version 2.0.0 or later. (Using the cable
for connection is not possible with the firmware version earlier than
Version 2.0.0.)
- An interface cable (sold separately, p.469) must be used.
When using the GP-E2 attached to the hot shoe, preparations as above
are not necessary. For how to update the GP-E2’s firmware, refer to the
Canon website.
Wireless functions cannot be set if the camera is connected to a
computer, GPS receiver, or another device with an interface cable.