Canon EOS 80D - Manual (Page 243)

243
3 Setting the FlashN
For details on the external Speedlite’s Custom Functions, refer to the
Speedlite’s instruction manual.
1
Select [External flash C.Fn
setting].
2
Set the desired function.
 Select the number, then press <0>.
 Select the setting, then press <0>.
1
Select [Clear settings].
2
Select the settings to be cleared.
 Select [Clear built-in flash set.],
[Clear external flash set.], or [Clear
ext. flash C.Fn set.], then press
<0>.
 When you select [OK], the respective
flash settings or all the Custom
Function settings will be cleared.
External Speedlite Custom Function Settings
Clear Settings
With an EX-series Speedlite, the Speedlite will always fire at full output if the
[Flash metering mode] in Flash Custom Function is set to [TTL] (autoflash).
The Speedlite’s Personal Function (P.Fn) cannot be set or canceled on the
camera’s [Flash control] screen. Set it with the Speedlite.