Canon EOS 1300D - Manual (Page 297)

297
Troubleshooting Guide
 If [53: Wi-Fi/NFC] is set to [Enable], the camera cannot be connected
to a printer. Set [Wi-Fi/NFC] to [Disable], then reconnect the camera
to a printer with an interface cable.
 Contents displayed on the screen vary depending on the printer. This
instruction manual lists all the printing effects available (p.246).
 Install the EOS software on the computer (p.315).
 If [53: Wi-Fi/NFC] is set to [Enable], the camera cannot be connected
to a computer. Set [Wi-Fi/NFC] to [Disable], then reconnect the
camera to a computer with an interface cable.
Printing-Related Problems
I cannot connect the camera to my printer.
There are fewer printing effects than listed
in the instruction manual.
Computer Connection Problems
I cannot download images to a computer.