Canon EOS 1300D - Manual (Page 119)

119
3 Auto Exposure BracketingN
 Follow steps 1 and 2 to turn off the AEB range display.
 The AEB setting will also be canceled automatically if the power
switch is set to <2>, flash recycling is completed, etc.
 Using AEB with continuous shooting
If continuous shooting (p.102) is set and you press the shutter
button completely, the three bracketed shots will be taken
continuously in this sequence: standard exposure, decreased
exposure, and increased exposure.
 Using AEB with single shooting (u)
Press the shutter button three times to take the three bracketed
shots. The three bracketed shots will be taken in the following
sequence: standard exposure, decreased exposure, and increased
exposure.
 Using AEB with the self-timer
With the self-timer > (p.103), you can take three
continuous shots after a delay of approx. 10 sec. or approx. 2 sec.
With (p.103) set, the number of continuous shots will be three
times the number set.
Canceling AEB
Shooting Tips
 AEB will not work with flash or bulb exposures.
 If [z2: Auto Lighting Optimizer] (p.123) is set to any setting other
than [Disable], the effect of AEB may be reduced.