ProSoft Technology BM-xx00-RM1K - Manual (Page 41)

Advanced User Interface for PC
ProSoft Technology, Inc. Page 41 of 48
April 21, 2015
9.7 4-20 mA Module Window Guide
1. Input 1 Status
2. Input 2 Status
3. Output 1 Status (Red Needle)
4. Output 2 Status (Red Needle)
5. FailSafe
a. Without the User Interface (default), the output reports last known value when RF or I/O failure
occurs.
b. Click the “Fs” button and a specific value can be assigned for output when RF failure occurs: Use the
Blue Triangle needle to set a specific value. Set value is indicated in blue on dial and numeric display
including last known value.
c. Apply button – must click apply for changes to take effect.
6. Force Output Button
a. Click “F” button to manually force a specific output. Forcing an output bypasses normal signal: Use
the Yellow needle for adjustment.
b. To disable forcing an output, click “F” again to deactivate force mode.
c. Closing the User Interface or unplugging the mini USB cable will automatically deactivate any forced
output(s).
7. Apply button – must click in order for changes to take effect.
8. Blue border indicates selected I/O Module.
9. Orange border indicates forced output is active.