ProSoft Technology BM-xx00-RM1K - Manual (Page 21)

Installation
ProSoft Technology, Inc. Page 21 of 48
April 21, 2015
3. Attach Radio Module to DataRail (next to the Bracket without any gap).
a. First, latch the top hook onto the rail, then snap in the spring-loaded clip
into place.
b. Connect Antenna. The Radio Module is equipped with a SMA (female)
connector. For outdoor installation, place a lightning arrestor between
Antenna and Radio Module connection.
4. Attach I/O Module(s) to the system.
a. Place Modules in any combination (do not leave gaps between Modules).
b. When using more than five (5) I/O Modules, determine maximum I/O
Module combination by using power budget calculator. http://psft.com/A5D