ProSoft Technology BM-xx00-RM1K - Manual (Page 29)

Wiring Diagrams
ProSoft Technology, Inc. Page 29 of 48
April 21, 2015
7 Wiring Diagrams
7.1 Radio Module (BM-0900-RM1 Shown)
Use Solid / Stranded (AWG) 28-12 Wire Gauge
Radio Module does not share a common ground with I/O Modules.
All inputs and outputs on I/O Modules provide field isolation.
Connect I/O Link Alarm output
to report when there is an I/O
link failure. Once the failure is
corrected, you must reset
power.
Connect RF Link Alarm
output to report when there
is an RF link failure.
This Input allows connection
of a dry contact switch for
manually overriding system
into FailSafe state for all
outputs.