ProSoft Technology AN-X-PB - Manual (Page 62)

Page 56 AN-X-PBSLV
January 2008
• Ethernet/IP configuration
• AN-X to AN-X configuration
Update Firmware Command
The Utilities/Update Firmware command updates all the firmware on an
AN-X you have previously selected using the Utilities/Select An AN-X
command.
This command resets the AN-X. You will receive a warning and be
given the opportunity to Cancel the command.
If you cancel at the filename dialog, the AN-X has already been reset and
is in configuration mode. Use the Utilities/Restart AN-X command to
restart it in production mode.
Click the Next>> button, and select the firmware file you want to
download and click Open.
AnxInit transfers the firmware file and restarts the AN-X.
After you run update the firmware, you must reconfigure the AN-X and
restore:
• PROFIBUS configuration
• Ethernet/IP configuration
• AN-X to AN-X configuration
Patch Firmware
The Utilities/Patch Firmware command applies small patches to the
firmware running on the AN-X.