ProSoft Technology AN-X-PB - Manual (Page 52)

Page 46 AN-X-PBSLV
January 2008
Using AnxInit
AnxInit is a 32-bit Windows application supplied with AN-X to perform
the following functions:
• Locate and identify AN-X modules on the Ethernet network
• Select a specific AN-X for configuration
• Set the IP address and other network parameters for an AN-X
• Restart the selected AN-X
• Display information about the selected AN-X
• Read the kernel parameters for the selected AN-X
• Update the flash (low level firmware) on the selected AN-X
• Update the firmware on the selected AN-X
• Patch the firmware on the selected AN-X
In addition, it can be used to:
• clear the AnxInit log
• copy the contents of the log to the clipboard for use by another
application. This is often useful for technical support