ProSoft Technology AN-X-PB - Manual (Page 47)

AN-X-PBSLV Page 41
January 2008
,consume
,,producer_ip,192.168.0.9
,,block_id,1,5000
,,,Node1Outputs,U8,2,7,I/0
Sending the Configuration to AN-X
When the configuration is complete, save it to a file. If you are using a
spreadsheet to create the configuration, save it as a file of type comma
separated variable (CSV).
To upload the configuration:
1. Start your web browser
2. Enter the AN-X IP address as the address, for example, 192.168.0.9
3. Select Automation Network/Configure AN-X Bridging Server
4. Browse or type in the configuration file name
5. Click Send File to AN-X
If the file is processed successfully, the web interface shows the
configuration. If an error occurs, the web interface gives an error
message. To see further details, select Log Files/Bridging Log (see page
64) and check for error messages at the end of the log.
Error Log
Errors that occur during configuration of AN-X to AN-X communication
or during operation are logged in the Bridging Log.
You can view the log using the AN-X web interface. Select Log
Files/Bridging Log to view the log.