ProSoft Technology AN-X-PB - Manual (Page 26)

Page 20 AN-X-PBSLV
January 2008
Type or browse the configuration file name into the Select file: area and
click Send File to AN-X.
If the AN-X is successfully configured, the web interface displays a
summary of the downloaded network.
If there has been an error, it displays an error message. To see the cause
of the error, select Log Files/System Error Log.
Configuring AN-X-PBSLV in a PROFIBUS Master
First, install or register the GSD file for the AN-X-PBSLV in the
program that configures the PROFIBUS master you are using.
If you are simply using the AN-X-PBSLV to pass data to the PROFIBUS
master, configure it using this GSD file. Select modules to define the
data you want to pass, then set the input and output lengths in the CSV
file you use to configure the AN-X-PBSLV to match the total lengths in
the master.
If you are using the AN-X-PBSLV to emulate or monitor other devices,
configure those devices in the master’s PROFIBUS configuration, and