ProSoft Technology AN-X-PB - Manual (Page 56)

Page 50 AN-X-PBSLV
January 2008
• the Default gateway for your network.
You must enter a valid default gateway address even if there is no device
at the gateway address on the network.
Click OK to complete the configuration.
Utilities/AN-X IP Configuration resets the selected AN-X. Use the
Utilities/Restart AN-X to restart the AN-X in production mode.
If you Cancel the Utilities/AN-X IP Configuration command, AN-X is
left running the boot code. Use the Utilities/Restart AN-X command to
restart the AN-X.
Restart an AN-X
Use the Utilities/Restart AN-X command to restart the currently selected
AN-X.
AN-X Info
The Utilities/AN-X Info command provides information about the
currently selected AN-X in the log window.
The information shown:
AN-X Info Ethernet MAC address
SerNum Serial number
DaughterID Daughterboard ID, 2 for AN-X-PBSLV
BootRev Boot code version
ConfigRev Configuration kernel version
ProdRev Production kernel version
HwRev Hardware version
FirmwRev Firmware release version (depends on current
operating mode)
Status see below
VendorId Vendor ID
ProdId Product ID
IpAddrStr IP address assigned using Utilities/AN-X IP
Configuration
HostName name assigned using Utilities/AN-X IP
Configuration