ProSoft Technology AN-X-PB - Manual (Page 37)

AN-X-PBSLV Page 31
January 2008
,1, I/0, 8, U8, Node1Inputs
,2, I/0, 4, U8, Node2Inputs
StatusInput
,3, O/0, 8, U8, Node3Outputs
,3, I/0, 12, U8, Node3Inputs
Sending the Configuration to AN-X
When the configuration is complete, save it to a file. If you are using a
spreadsheet to create the configuration, save it as a file of type comma
separated variable (CSV).
To send the configuration to AN-X:
1. Start your web browser
2. Enter the AN-X IP address as the address, for example, 192.168.0.4
3. Select Automation Network/Configure Ethernet/IP Server
4. Browse or type in the configuration file name
5. Click Send File to AN-X
The web interface displays the result of the upload, either success or an
error message. To see further details, select Log Files/Ethernet/IP Log
(see page 64) and check for error messages.
Viewing the Current Configuration
To view the configuration in an AN-X module, access the AN-X using
the web interface, and select Automation Network/View Configuration
Files. Click on the link AN-X-PBSLV Ethernet/IP Configuration File.
To save the configuration to a file on your computer, right click on the
link and save the target to a file.
Error Log
Errors that occur during configuration of scheduled data or during
operation of scheduled data or unscheduled messaging are logged in the
AN-X.
You can view the log using the AN-X web interface. Select Log
Files/Ethernet/IP Log to view the log.