ProSoft Technology AN-X2-GENI - Manual (Page 7)

Module Overview
The AN-X2-GENI (AN-X-GENI/B) communications module connects a ControlLogix
PLC or other device to a Genius I/O network.
The module supports scheduled connections with a ControlLogix processor, over
Ethernet, so the ControlLogix processor can read inputs from the Genius network and
write outputs.
The AN-X module acts as a scanner on the Genius network. It supports up to 31 Genius
blocks.
The AN-X2-GENI module has a web interface for configuration, for monitoring logs, and
for performing other administrative functions. You can communicate with the module
using any standard web browser such as Internet Explorer.
The module firmware can be updated over Ethernet using the web interface. Refer to
page 55 for details.