ProSoft Technology AN-X2-GENI - Manual (Page 45)

AN-X2-GENI (AN-X-GENI/B) Page 39
Using the Web Interface
The AN-X module contains a webserver capable of communicating with standard web
browsers such as Internet Explorer.
The AN-X module contains a webserver capable of communicating with standard web
browsers such as Internet Explorer.
Use the web interface to:

set the baud rate and serial bus address for the AN-X2-GENI

set the Genius bus I/O network configuration

set the ControlLogix scheduled data configuration

view the current configuration

view AN-X logs

view and clear faults from Genius blocks
It also contains contact information for support.
To use the web interface, you must know the IP address of the AN-X. To access the web
interface, start your web browser and type the AN-X IP address where you normally
enter web addresses in the browser.
The left pane contains commands. Click on the arrows at the left of the main headings to
expand or contract the sections.