ProSoft Technology AN-X2-GENI - Manual (Page 44)

Page 38 AN-X2-GENI (AN-X-GENI/B) May 2013
You can also use an HMI to write to the global data that the AN-X2-GENI is
transmitting, that is, the file that corresponds to the AN-X2-GENI serial bus address. Of
course, if the AN-X2-GENI global data is mapped to a ControlLogix connection, the
global data you write using the HMI will be overwritten by the data from the scheduled
data.
Note:This operation uses the original PLC-5 Ethernet CSP protocol, it doesn’t work with
the Ethernet IP driver.