ProSoft Technology MVI56-BAS - Manual (Page 66)

Using the Program Port (PRT1) MVI56-BAS ♦ ControlLogix Platform
User Manual BASIC Module (DB/BAS Compatible)
Page 66 of 234 ProSoft Technology, Inc.
December 13, 2011
22 Bad parameter.
23 DO stack error.
24 Control stack error.
25 GOSUB stack error.
26 Too many strings.
27 Requested STRING array size is bad.
28 Missing constant.
29 Missing comma.
30 Second STRING statement encountered.
31 STRING statement encountered after variable declaration.
32 Bad string number.
33 String encountered before STRING declaration.
34 File name too long.
35 Could not open file.
36 Statement not allowed in RUN mode.
37 Bad variable name.
38 NOT USED.
39 Too many variables.
40 Too much space needed for dimensioned variable.
41 Variable or statement must follow line number.
42 NOT USED.
43 UNTIL without preceding DO.
44 TO missing from FOR statement.
45 NEXT variable does not match FOR variable.
46 STEP size in FOR statement is zero.
47 NEXT statement without preceding FOR.
48 Missing "0" or "1" after CLOCK token.
49 DH-485 driver failure.
50 ONTIME TIME line number is out of range.
51 RETI without corresponding interrupt request.
52 Could not allocate any more memory.
53 Too many constants.
54 Could not find DATA statement.
55 Missing GOTO/GOSUB after ON expression.
56 ON expression is negative.
57 RENumber error (NUM1 must be >= NUM2).
58 Missing string.
59 Bad @ or # value.
60 Unknown CALL number.
61 Bad time parameter.
62 Bad date parameter.
63 String too small.
64 Bad argument.
65 Serial port failure.
66 Serial port failure.
67 Serial port failure.
68 Serial port failure.
69 Setup jumper in wrong position.
70 Backplane interface failure.