ProSoft Technology MVI56-BAS - Manual (Page 157)

MVI56-BAS ♦ ControlLogix Platform BASIC CALLs Syntax
BASIC Module (DB/BAS Compatible) User Manual
ProSoft Technology, Inc. Page 157 of 234
December 13, 2011
G = Message Timeout (1 through 255. For example: 1 = 100ms, 25 = 250 ms,
and so on)
H = Data Destination. Use one of the following codes:
Destination File Code Description
0 CPU Input Image File
1 CPU M1 File
2 Internal String
3 CPU Input Image File and Internal String
4 CPU M1 file and Internal String
I = The word offset in the destination file.
Note: If the parameter H chosen as 0, the words 0 and 1 are reserved.
J = The string number.
S = The CALL result code.
Code Description
0 Successful
1 Disabled
2 Bad Input Parameter
3 Port DH-485 not enabled (DF1 enabled)
4 String is too small
5 String is not dimensioned
Example:
.
.
.
90 PUSH 2,2,7,ASC(N),100,20,5,1,0,0: CALL 27: POP STATUS
100 IF(STATUS<>0) THEN PRINT "Unsuccessful CALL 27 Setup"
110 REM CALL 27 remains active as long as BASIC
120 REM continues to RUN.
.
.
.