ProSoft Technology MVI56-BAS - Manual (Page 32)

Module Configuration MVI56-BAS ♦ ControlLogix Platform
User Manual BASIC Module (DB/BAS Compatible)
Page 32 of 234 ProSoft Technology, Inc.
December 13, 2011
After completing the module setup, the Controller Organization window will
display the module’s presence. The data required for the module will be defined
to the application, and objects will be allocated in the Controller Tags data area.
An example of the Controller Organization window is shown below.
Download the new application to the controller and place the processor in run
mode. If all the configuration parameters are set, the module’s Application LED
(APP LED) should remain off and the backplane activity LED (BP ACT) should
blink rapidly. Refer to Diagnostics and Troubleshooting if you encounter errors.
Attach a computer or terminal to PRT1 on the module and look at the status of
the module using the Configuration/Debug Menu in the module.