ProSoft Technology MVI56-BAS - Manual (Page 57)

MVI56-BAS ♦ ControlLogix Platform Using the Program Port (PRT1)
BASIC Module (DB/BAS Compatible) User Manual
ProSoft Technology, Inc. Page 57 of 234
December 13, 2011
Step 4
Using the menu bar in the ASCII Terminal software you are using, select the
"Send File…" option.
Select the BASIC program you want to send and select the Ymodem protocol.
The MVI56-BAS module only supports Ymodem protocol.
While transferring the file, a window shows the remaining time:
Step 5
Remove the module from the rack and set the setup jumper in OFF mode:
Put the module back to the rack and the procedure is finished.