ProSoft Technology PS69-DPS - Manual (Page 13)

PS69-DPS ♦ CompactLogix or MicroLogix Platform Start Here
Profibus DP Slave Communication Module User Manual
ProSoft Technology, Inc. Page 13 of 108
May 9, 2014
1.6 Installing the Module in the Rack
This section describes how to install the module into a CompactLogix or
MicroLogix rack.
Before you attempt to install the module, make sure that the bus lever of the
adjacent module is in the unlocked (fully right) position.
Warning: This module is not hot-swappable! Always remove power from the rack before
inserting or removing this module, or damage may result to the module, the processor, or other
connected devices.
1 Align the module using the upper and lower tongue-and-groove slots with the
adjacent module and slide forward in the direction of the arrow.
2 Move the module back along the tongue-and-groove slots until the bus
connectors on the PS69 module and the adjacent module line up with each
other.