PLANET NAS-3410 - Manual (Page 45)

37
When the domain controllers' NetBIOS names cannot be resolved by the network services, go to
the 'DC Host Table' function on the Domain Account tab of the Security
ÆAccount menu, You
can enter the mapping of the NetBIOS names to IP addresses in the DC Host Table.
6.4 Creating UNIX/Linux Host
For NAS-3410, NFS client’s mount privileges are granted specifically to UNIX/Linux host created
by the administrator. If a UNIX/Linux host is granted access right to a share in the NAS-3410, user
of the UNIX/Linux host can have access to the share. Administrator should create a UNIX/Linux
host list prior to grant access right to them.
To create a list of the UNIX/Linux host:
1. Go to Security
ÆAccount menu.
2. Click the UNIX/Linux Host tab.
3. Enters a single host IP address in the first text box.
4. Or, enter the start IP address in the first text box and the last 3 digits of the end IP address
in the second text box to input a range of the host IP addresses of the Host IP field.
5. Click the Add button to add the host IPs to the host list.
6. Click Apply to save the setting.
6.5 Creating Share and Assigning Share Permissions
You can share a specific folder in any volume created in the NAS-3410 with others on the network.
When you create a share, you can assign the permission to the share that other users will be
allowed or denied when they access the share over the network.
To create a new share:
1. Go to Security
ÆFile/Folder menu.
2. Locate the volume you want to share on the volume lists.
3. Click the Create hyperlink to share the corresponding volume. Then go to Step 9.
4. If you want to share an existing folder under a volume, click the volume name hyperlink.
Click the folder hyperlink until you reach the desire directory. Then, go to Step 8.
5. If you want to share a new folder under a volume, click the folder hyperlink until you reach
the desire directory path.
6. Click the Create Folder button to create a new folder.
7. Enter a new folder name.
8. Click the Create hyperlink to share the corresponding folder.
9. Enter a unique share name in the Share Name field. The share name is what user will see
when they connect to this share. The actual name of the folder does not change.
10. To add a comment about the share, type the text in Comment.