PLANET NAS-3410 - Manual (Page 15)

System Ready
2. The IP address of LAN1 is shown. Press the middle button to configure LAN1 IP address. Note
that the
symbol at the right hand upper corner indicates that the IP address can be
configured using the LCD console.
LAN1 IP:
192.168.1.1
3. Move the cursor to Yes by pressing the left button and then press the middle button to confirm.
Configure LAN 1?
Yes/ N o
4. Move the cursor to the correct position using the left or right button. Then press the middle
button to change that number.
LAN1 IP:
1 92.168.1.1
7