PLANET NAS-3410 - Manual (Page 14)

6
2.2 Setting the IP Addresses
LCD console flow chart
System Ready
LAN 2 IP:
192.168.2.1
Server Name:
NASD8040000
Data/Time:
8/21/2002 05:30
Firmeware Ver.:
V1.00
CPU Fan Speed:
3994 RPM
Thermal (oC)
67 40
Voltage (V)
1.44 3.30 4.68
LAN 3 IP:
192.168.3.1
LAN 1 gateway :
192.168.1.254
LAN 1 mask :
255.255.0.0
LAN 2 gateway :
192.168.2.254
LAN 2 mask :
255.255.0.0
LAN 3 mask :
255.255.0.0
LAN 3 gateway :
192.168.3.1
LAN 1 IP:
192.168.1.1
Enter Yes
Configure LAN 1
IP/Gateway/Mask
Configure LAN 1?
Yes / No
No
Enter Yes
Configure LAN 2
IP/Gateway/Mask
Configure LAN 2?
Yes / No
No
Enter Yes
Configure LAN 3
IP/Gateway/Mask
Configure LAN 3?
Yes / No
No
Only display when
Gigabit Ethernet
Adapter is installed
System will
automatically display
the next screen every
two seconds when idle
LCD menu console flow chart
Configuring the IP addresses using the LCD console
1. After NAS-3410 is boot up, the LCD console shows System Ready. Press the right button.