PLANET VIP-350PT User Manual
Page 83
[83/168]
PPPoE Settings
Point-to-Point Protocol over Ethernet (PPPoE) for xDSL dialup.
1
.
U s
e
r
N
a
m
e
2
.
P
a
s
s
w o
r
d
3
.
S
e
r
v
i
c
e
N
a
m e
Back
User Name
Name used by the phone for PPPoE authentication during dialup.
[Abc..]/[123..]: Toggle between digits and alphanumeric input, where. [Abc..] indicates current
input method is alphanumeric and [123..] indicates digits input.
L
o
g
i
n
U s
e
r
N
a
m e
:
Del
Abc../123.. Clear
Back
Password
Password used by the phone for PPPoE authentication during dialup.
Initially show 10 ‘*’ signs but show clear text on user input because alphanumeric characters may
be needed.
P
a
s
s
w o
r
d
:
1
2
3
4
Del
Abc../123.. Clear
Back
Í
Note
You should enter "0.0.0.0" to disable gateway routing. That is, if you reside
on a LAN without gateway, you must set this to "0.0.0.0" rather than a
non-existent IP; otherwise the network packets may not be routed correctly
(which may result in no voice packets could be sent from this phone)! This
constrain applies to DHCP and PPPoE as well: DHCP and PPPoE server
should not designate a non-existent or invalid gateway.