PLANET VIP-350PT - Manual (Page 165)

[165/168]
Appendix B Dial Plan Samples
Example 1
The following dial plan:
*St4-|#St4-|911|1>#t8.r9t2-|0>#t811.rat4-|^1t4>#-
consists of the following rules:
z *St4-: If the first digit entered is *, all other dial plan rules are voided. More digits can be entered
after the initial * digit, and the timeout before automatic dial string send is four seconds.
z #St4-: same as above, except for # as the initial digit entered.
z 911—if the dial string 911 is entered, send it immediately.
z 1>#t8.r9t2-: If the first digit entered is 1, the timeout before automatic send is eight seconds. The
terminating character # can be entered at any time to manually send the dial string. After the 11 th
digit is entered, the timeout before an automatic send changes to two seconds. The user can
enter more digits until the dial string is sent by the timeout or by the user entering the # character.
z 0>#t811.rat4-: If the first digit entered is 0, the timeout before automatic send is eight seconds,
and the terminating character # can be entered at any time to manually send the dial string. If the
first three digits entered are 011, then, after an additional 11 digits are entered, the timeout before
an automatic send changes to four seconds. The user can enter more digits until the dial string is
sent by the timeout or by the user entering the # character.
z ^1t4>#-: If the first digit entered is anything other than 1, the timeout before an automatic send is
four seconds. The terminating character # can be entered at any time to manually send the dial
string. The user can enter more digits until the dial string is sent by the timeout or by the user
entering the # character.
Example 2
The following dial plans:
.t7>#......t4-|911|1t7>#..........t1-|0t4>#.t7-
or
.t7>#r6t4-|911|1t7>#.r9t1-|0t4>#.t7-
consist of the following rules:
z .t7>#r6t4-: You must enter at least one digit. After the first digit is entered and matched by the dial
plan, the timeout before an automatic send is seven seconds, and the terminating character # can
be entered at any time to manually send the dial string. After seven digits are entered, the timeout
before an automatic send changes to two seconds. The - symbol at the end of the rule allows
further digits to be entered until the dial string is sent by the timeout or the user entering the #
character.
z 911: if the dial string 911 is entered send this string immediately.
z 1t7>#.r9t1-: If the first digit entered is 1, the timeout before an automatic send is seven seconds,
and the terminating character # can be entered at any time to manually send the dial string. After
the 11th digit is entered, the timeout before an automatic send changes to one second. The user
can enter more digits until the dial string is sent by the timeout or by the user entering the #
character.
z 0t4>#.t7-: If the first digit entered is 0, the timeout before an automatic send is four seconds, and
the terminating character # can be entered at any time to manually send the dial string. After the
second digit is entered, the timeout before an automatic send changes to seven seconds. The
user can enter more digits until the dial string is sent by the timeout or by the user entering the #
character.