PLANET NVR-3280 - Manual (Page 76)

32-Channel Rack Mount Network Video Recorder with 8-bay Hard Disks
NVR-3280
76
* If this option is enabled, once the hard drive is full, the recycle function will then start but it will ensure
that the number of days of recording data defined here will stay in hard drive instead of wiping out 20GB
of data at a time.
* If the hard drive is not full, the NVR re-calculates twice a day (each at 2:30am and 2:30pm) to keep the
defined number of days of recording data from these two particular points of time backward.
The section at the bottom allows you to turn on or off a particular recording type on any channels.
The “Camera Recording Setting” section allows you to turn on or off a particular recording type on any
channels.
The section at the bottom of the page allows you to disable audio recording (record video only) of
particular channels.
6.4.2 Schedule Recording
Here you can define the time range of the schedule recording for all channels.
To configure a schedule recording:
1. Use the “Camera” drop-down menu and select a camera first.
2. You can use the schedule table to set the time range. Click the cell boxes and then move the curser
horizontally to let you set what hours to perform recording during a day. Click and move vertically to