PLANET NVR-3280 - Manual (Page 58)

32-Channel Rack Mount Network Video Recorder with 8-bay Hard Disks
NVR-3280
4. It is corresponding information that should be displayed in the “Camera Information” section. Enter its
username and password and select the channel ID and name the camera.
5. Click on “Detect” to establish connection between the recorder and the camera. If connection
establishes successfully, camera’s detailed information should be polled and displayed as shown
below.
6. Adjust its video format, frame rate, resolution or bitrate, etc if you wish. You can also click on the
“Preview” to preview the live video of the camera.
Click “Add” to finish adding the camera.
If cameras are marked with “*” in the search result, it means those cameras are already configured
and connected to NVR.
58