PLANET NVR-3280 - Manual (Page 63)

32-Channel Rack Mount Network Video Recorder with 8-bay Hard Disks
NVR-3280
2. Select a position number for the preset point from the “Position Number” drop-down menu and fill in a
name in the “Position Name” field for easier identification.
3. Use the PTZ control provided on the configuration page to set the preset point and set the position as
the “HOME” position if you wish.
4. Click “Apply” to save the configuration.
6.2.4 PTZ Preset Sequence
Once you have multiple preset points defined for a camera, it is convenient for monitoring the setup of
the sequencing viewing among those preset points and let the recorder automatically switch between
them for you.
To configure preset sequence for a camera,
1. Select a camera from the “Camera” drop-down menu. The available preset points should be listed in
“Camera Presets” section.
2. Pick the ones you like for sequence viewing and press the “->” button to move them to the “Adjust
Position” section, then use the up and down buttons to adjust their sequences.
3. Finally, select a dwell time from the drop-down menu and click “Apply” to save the configuration.
6.2.5 E-Map Setting
6.2.5.1 Local Map Setting
Local Map Setting is a function that alerts users whenever there is an event triggered (e.g. motion
63