PLANET NVR-3280 - Manual (Page 74)

32-Channel Rack Mount Network Video Recorder with 8-bay Hard Disks
NVR-3280
Define which system events should trigger the recorder to send out notifications.
Define how the notifications will be sent and where they will be sent to.
* Event trigger may not work for cameras that are placed outside of your local network or on the Internet
until the UPnP Port Forwarding” is enabled in both the NVR and the router.
6.4 Recording Configurations
The “recording configurations” gives users the overall control of how and when a recording is performed
and the quality of different types of recordings performed on each channel. It can help the recorder to
operate with sufficient system resource by performing recording only when it’s necessary with adjustable
recording frame rate.
6.4.1 General Settings
You can define the following in “General Settings”:
• Pre-Alarm/Post-Alarm recording length
• Recording frame rate
• Define to always keep a number of days of previously recorded data
• Enable/disable different recording types on different cameras
• Enable/disable audio recording
74