PLANET NVR-3280 - Manual (Page 71)

32-Channel Rack Mount Network Video Recorder with 8-bay Hard Disks
NVR-3280
Configuring an FTP server
To add an FTP server,
1. Start by giving a name to the server that you are adding to the recorder.
2. Enter the hostname or the IP address of the FTP server.
3. Enter the communication port of the FTP server (usually port 21).
4. Enter the username and password of the FTP server if it’s required.
5. Check “Use Passive Mode” if it’s required or leave it unchecked to use active mode.
71