PLANET ICA-HM830 - Manual (Page 50)

number in back of IP address. For example: http://192.168.0.20:8080 .
Therefore, the user can access the Internet Camera by either
http://xx.xx.xx.xx/ , or
http://xx.xx.xx.xx:xxxx/ to access the Internet Camera.
If multiple devices are installed on the LAN and also required to be
accessed from the WAN, then the HTTP Port can be assigned as the
virtual server port mapping to support multiple devices.
RTSP Setting RTSP Port:
The RTSP protocol allows a connecting client to start a video stream.
Enter the RTSP port number to use. (The default value is 554)
HTTPS Setting Enable HTTPS:
The HTTPS service is a combination of the Hypertext Transfer Protocol
with the SSL/TLS protocol to provide encryption and secure
identification of the camera access.
Bonjour Setting Enable Bonjour:
The Bonjour service allows camera can be discovered with Apple
Safari browser applied that will show in the Bonjour bookmarks menu.
UPnP Notification Enable UPnP:
The UPnP function allows camera can automatically be detected and
a new icon will be added to “My Network Places” if your operating
system is UPnP enabled.
NAT Traversal Setting Enable NAT Traversal:
When enabled, the Internet Camera will attempt to configure port
mapping in a NAT router on your network.
50