PLANET ICA-HM830 - Manual (Page 10)

Rear View
Interface Description
Power Jack
The input power is DC 12V,2A.
Note：ONLY use package power adapter supplied with the
internet. Otherwise, the product may be damaged.
RJ-45 LAN socket
Connect to PC or Hub/Switch.
For connect to 10Base-T Ethernet or 100Base-TX Fast
Ethernet cabling. This Ethernet port built auto-negotiation
protocol can detect or negotiate the transmission speed of the
network automatically. Please use CAT-5 cable to connect the
Network Camera to a 100Mbps Fast Ethernet network switch
or hub.
Power / Status LED (orange color)
This LED will be flashing while camera DC power is on
camera starting, and this LED light while camera ready.
Network LED (green color)
This LED will be flashing while the camera accessing of the
camera.
Note：ONLY use one power source, either from DC or from
802.3af Power over Ethernet..
MicroSD Card Slot
The IP Camera has built-in a MicroSD card slot accepts
MicroSD memory card for image / video event recording.
Audio Out
Connect a loud speaker to the IP Camera. This is for voice
alerting and two-way audio.
Audio In Connect a microphone to the IP Camera.
GPIO
The 7 pin terminal block includes 4 input ports and 1 output
ports.
10