PLANET ICA-107 - Manual (Page 42)

Appendix A: Router/Gateway Setup for Internet Viewing
38
Camera. The Router/Gateway should set
ort forwarding or virtual server for the connections. Please see the illustration as below.
To view IP Camera across the Internet, you have to make sure Router/Gateway has configured to pass
incoming TCP/UDP connections from remote PC to the IP
p
Router/Gateway Port Forwarding/Virtual Server Setup
Name Protocol Port LAN IP
Setup 1 TCP 80 192.168.0.20
Setup 2 TCP 4321 192.168.0.20
Setup 3 TCP 4322 192.168.0.20
Port Definition
1 It is the port of Web port. You have to configure the protocol to “TCP”.
It is rotocol to “TCP”.
Setup
Setup 2 the port of AV Control port. You have to configure the p
Setup 3 It is rotocol to “TCP”. the port of AV Data port. You have to configure the p
Viewing IP Camera via Web Browser
If you want to view the video via Web Browser from Internet, you have to ensure the Router/Gateway
has configured both setup1 and setup 2. If the web port is not default port “80”, but changed to 8080.
The remote user has to enter http://210.66.155.85:8080. Without Setup 2, you will not see the video
streaming in this PC.