PLANET ICA-107 - Manual (Page 32)

28
A-107W Only) 3.6. WLAN (IC
(Example on ICA-107W)
WPS
Self PinCode Here displays the WPS pin code used to connect to WPS-enabled
wireless access points. You have to input this number into the WPS
enabled access point to establish WPS connection.
Configure via Push Button Click the button and this camera will enter PBC-style WPS connection
state for 120 sec. Please push ‘Start PBC’ button on the wireless AP
you wish to connect within 120 sec to establish WPS connection (The
remaining time will be displayed on the button).
If connection can not be established after 120 sec, you’ll be prompted
by a message box, and you can press ‘Start PBC’ button to try again.
Configure via PinCode If you have wireless access point’s WPS PIN code, you can input it here
and press ‘Start PIN’ button to start to establish PIN-style WPS
connection.
Wireless Setting
Wireless connection Enable or disable the wireless function of the IP Camera. By default, the