PLANET ICA-107 - Manual (Page 24)

20
3. Web-Base Connection Management Interface
3
The ICA-107 / ICA-107W can be configured with Web Browser. Before configure, please make sure
your PC is under the same IP segment with IP Camera.
3.2. Connecting to IP Camera
z Use the following procedure to establish a connection from PC to the IP Camera.
z Once connected, user can add the IP Camera to your Browser’s Favorites or Bookmarks.
User can use the Web browser to connect the IP Camera for viewing or setting. Open the web browser
and enter the IP address of the IP Camera to establish a connection. The default IP address of the
camera is “ http://192.168.0.20 ”.
This chapter provides setup details of the IP Camera’s Web-based Interface.
.1. Introduction
User should be prompted to input the user name and password. Default username and password is
admin assword has entered. / admin . Click OK to continue after user name and p
If you’re rejected, maybe the password has been modified previously. This should not happen if this is a
newly-purchased camera, however, if you get the camera from someone else, the password would be
changed. Please try to obtain the correct user name / password, or you’ll have to reset the camera.