PLANET ICA-107 - Manual (Page 13)

9
168.0, and ends with a value
reater than 2 and less than 254 (You can use the following example 192.168.0.239). In Subnet
5. In IP address field, please fill in any IP address begins with 192.
g
mask field, please fill 255.255.255.0. Please keep all other fields empty, and click OK.
If you changed the IP address of this IP Camera and you forget it, there’re 2 methods to recover it:
a. Press and hold the Reset button located at the bottom of this IP camera, to clear all settings
of the IP camera and reset the IP address back to 192.168.0.20. You’ll lose all settings in the
IP camera.
b. Ask network administrator to check the DHCP release table, if the camera was set to obtain
the IP address by DHCP, a new record will be added to DHCP release table on DHCP server
when the IP camera is connected to the local area network.