10 utility setup – PLANET DVR-1672 User Manual

Page 50

Item

Description

HDD Initialization

Select to enter hard disk initialization menu. Please stop recording

before entering this menu. Enter the menu, system will show all the

data (model/ volume) of HDD that is installed in the DVR. Check the HDD

you’d like to initialize, and then press “Start”. HDD initialization is

successful when the status shows “Succeed”.

USB Initialization

Clean up all data on USB. Enter USB initialization and press “YES” to

clean up all data on your USB. The initialization is done when it shows

“Succeed”.

System Recovery

Restore system default values.

Reset System Events

Reset all the recording events in the DVR.

Copy Setup to USB

Copy configuration to a USB device. There will be a file named

“sdvr.config” on your USB.

Download Setup from USB

Download configuration from a USB device into DVR.

Upgrade

Upgrade DVR through USB.

Please stop recording and backup setup configuration before upgrading.

System will reboot automatically when the upgrade is completed.

NOTE!! DO NOT TURN OFF POWER OR UNPLUG USB DEVICE DURING THE UPGRADE as it

may cause incomplete firmware upgrade and damage to the DVR.