PLANET DVR-1672 User Manual
Page 49
43
Item
Description
Mouse Speed
Adjust the mouse moving speed
Buzzer & Relay Setup
Key Tone
Enable/ Disable keystrokes.
Alarm Buzzer
Enable/ Disable buzzer operation when the alarm is triggered for HDD
error, sensor, motion and vloss (Video Loss).
Alarm Relay
Enable/ Disable the signal to be sent to the RELAY OUT blocks when the
alarm is triggered for HDD error, sensor, motion and vloss.
5.9.4 Spot Setup
The DVR has two modes of video output; one is the main video output, the other is spot
video output. SPOT setup is for controlling orders of channels that the system cycles
through in SPOT mode. User can monitor every channel in the SPOT mode.
Item
Description
Auto-Seq. Interval
(Seconds)
The duration interval time between channels is in seconds under SPOT
mode (1~999 seconds).
Enable Spot
When setting “Enable Spot”, the “MAIN/SPOT” BNC terminal will be
confined/restricted to Spot output port only.
Skip Video Loss Channel
Whether to skip channels without video signal.
Channels
Select which channels will be displayed in the sequence.