PLANET DVR-1672 - Manual (Page 29)

23
Item Description
Alarm Duration(Seconds) Alarm duration time (1~60 seconds).
Motion Popup
Check the box to Enable/ Disable popup screen function for all channels.
When motion is detected in LIVE mode, the detected channel image will
popup in full screen display.
Enable Check the box to Enable/ Disable motion detection for each channel.
Sensitivity Drag the bar or press ◀ ▶ to set up Sensitivity from value 0 to 10 for each
channel. The lower value you set lower the sensitivity it will be
Motion Area Setup Enter to setup motion detection area
Apply to All Set all the channels to the same setting.
5.3.1.1 Motion Area Setup
There are partitions in motion detection area (22x15 blocks). Under initializing status,
motion detection area is in the entire screen. Red colored area is undetected; yet the
detected area is transparent.