PLANET DVR-1672 - Manual (Page 30)

24
Item Description
Mask Mouse Selection Select to mask the mouse selected area.
All Area Detection Select all the images as motion detection area.
Mask All Area Cancel all motion detection images on the screen.
Continue Continue setup.
Exit & Save Save setup and exit setup page.
Exit & Discard Cancel setup and exit setup page.
5.3.2 Sensor Setup
Item Description
Alarm Duration(Seconds) Alarm duration time (1~60 seconds).
Sensor Popup Check the box to Enable/Disable popup screen function for all channels.
When Sensor is detected in LIVE mode, the detected channel image will
pop up in full screen display.
Sensor Popup Check the box to Enable/Disable popup screen function for all channels.
When Sensor is detected in LIVE mode, the detected channel image will
pop up in full screen display.
Sensor Polarity Click or press ▼ to select between HIGH/ LOW voltage for triggering
sensor detection or OFF to turn off polarity for each channel
Low Polarity：Sensor has not been triggered. When connected, sensor
will be turned on.
High Polarity：Sensor has been triggered. When connected, sensor
status will be turned off.
Off：Sensor is deactivated, and will not be turned on/off.
All off Set all sensors polarity to off.
All Low Set all sensors p olarity to low level.
All High Set all sensors p olarity to high level.