Eiki LC-HDT10 - Manual (Page 27)

27
BASIC OPERATION
SYSTEM SELECT MENU (SDI)
SYSTEM SELECT Menu icon
Displays system being selected.
Systems on this dialog box can
be selected.
Custom Mode (1~15) set in
DISPLAY ADJUST Menu.
(P30, 31)
SYSTEM SELECT MENU (Component video)
SYSTEM SELECT Menu icon
Displays system being selected.
Systems on this dialog box can
be selected.
Custom Mode (1~15) set in
DISPLAY ADJUST Menu.
(P30, 31)
SELECT VIDEO SYSTEM
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
SYSTEM SELECT Menu icon.
Press POINT DOWN button to move a red arrow pointer to
system that you want to select and then press SELECT button.
1
2
Projector automatically detects incoming Video signal, and adjusts
itself to optimize its performance.
When Video System is 1035i, 1080i/50 or 1080i/60, select system
manually first.
If projector cannot reproduce proper video image, it is necessary to
select a specific component video signal format among 480i, 575i,
480p, 575p, 720p, 1035i , 1080i/50 or 1080i/60.
Auto
COMPONENT VIDEO SIGNAL FORMAT
SDI Input
Component video (Y, Pb/Cb, Pr/Cr) Input
Projector automatically detects incoming SDI signal (480i, 575i, 1035i,
1080i/60, 1080i/50, 720p, 1080p/30 and 1080psf/30), and adjusts itself
to optimize its performance.
When System is 1080i/60 or 1080psf/30, select system manually first.