Eiki LC-HDT10 - Manual (Page 17)

17
BEFORE OPERATION
READY
LAMP
LAMP
REPLACE
WARNING
TEMP.
READY indicator LAMP indicator LAMP REPLACE indicator
This indicator lights green
when a projector is ready to
be turned on. And it flashes
green in Power Management
mode or internal projector
temperature is to high.
(P37, 39) This indicator is dim when a
projector is turned on. And
bright when a projector is in
stand-by mode.
INDICATORS
WARNING TEMP. indicator
This indicator flashes red
when internal projector
temperature is too high.
(P39)
WARNING
TEMP.
READ
Y
LAMP
REPLA
CE
LAMP
FRONT INDICATORS
REAR INDICATORS
This LAMP REPLACE
indicator lights yellow when
any of Projection Lamps is
nearing its end, and flashes
when any of them becomes
out. Check which lamp
needs to be replaced on
Lamp Status Display.
(P40-41)